Basit öğe kaydını göster

dc.contributor.authorEroglu, S.
dc.contributor.authorCetinkaya, S.
dc.date.accessioned2021-03-02T22:38:54Z
dc.date.available2021-03-02T22:38:54Z
dc.date.issued2018
dc.identifier.citationCetinkaya S., Eroglu S., "Synthesis of Tin Powder Using Tin Oxide and Ethanol", JOM, cilt.70, sa.5, ss.656-660, 2018
dc.identifier.issn1047-4838
dc.identifier.otherav_0dddff55-0604-4bf0-befe-0d3dff998a34
dc.identifier.othervv_1032021
dc.identifier.urihttp://hdl.handle.net/20.500.12627/14913
dc.identifier.urihttps://doi.org/10.1007/s11837-018-2781-8
dc.description.abstractThe reduction behavior of SnO2 powder has been investigated in the temperature range of 900-1200 K under ethanol flow. Scanning electron microscopy, x-ray diffraction, and mass measurement techniques were used to characterize the products. Full oxide reduction was attained at 1000 K, 1100 K, and 1200 K within about 20 min, 15 min, and 7.5 min, respectively. At 900 K, the extent of reduction increased with the reaction time up to 20 min, but further increases in the time (30 min and 60 min) resulted in a slight mass gain. This was attributable to the C uptake. Spherical Sn particles (diameter similar to 1 mu m) were observed at 1000 K and 1100 K. At 1200 K, large beads of Sn (diameter 400-800 mu m) were obtained. The spherical particle morphology was attributed to the liquid metallic phase formed during the reaction. The reduction mechanism of SnO2 in ethanol has been discussed in the light of thermodynamic and experimental results.
dc.language.isoeng
dc.subjectYerbilimleri
dc.subjectMALZEME BİLİMİ, MULTIDISCIPLINARY
dc.subjectMalzeme Bilimi
dc.subjectMühendislik, Bilişim ve Teknoloji (ENG)
dc.subjectMİNERALOJİ
dc.subjectMETALURJİ VE METALURJİ MÜHENDİSLİĞİ
dc.subjectTemel Bilimler (SCI)
dc.subjectMADEN VE MİNERAL İŞLEM
dc.subjectMühendislik
dc.subjectMaden Mühendisliği ve Teknolojisi
dc.subjectMetalurji ve Malzeme Mühendisliği
dc.subjectMühendislik ve Teknoloji
dc.titleSynthesis of Tin Powder Using Tin Oxide and Ethanol
dc.typeMakale
dc.relation.journalJOM
dc.contributor.departmentİstanbul Üniversitesi , Mühendislik Fakültesi , Metalurji Ve Malzeme Mühendisliği
dc.identifier.volume70
dc.identifier.issue5
dc.identifier.startpage656
dc.identifier.endpage660
dc.contributor.firstauthorID252849


Bu öğenin dosyaları:

DosyalarBoyutBiçimGöster

Bu öğe ile ilişkili dosya yok.

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster