Show simple item record

dc.contributor.authorSaipullaev, M.
dc.contributor.authorYildiz, E.
dc.contributor.authorErdemir, U.
dc.date.accessioned2021-03-05T07:43:03Z
dc.date.available2021-03-05T07:43:03Z
dc.date.issued2018
dc.identifier.citationSaipullaev M., Erdemir U., Yildiz E., "INFLUENCE OF BULK THICKNESS, CURING TIME, AND CURING UNIT TYPE ON THE MICROHARDNESS OF DIFFERENT-VISCOSITY BULK-FILL COMPOSITES", MECHANICS OF COMPOSITE MATERIALS, cilt.54, ss.675-684, 2018
dc.identifier.issn0191-5665
dc.identifier.otherav_953b49f5-a2f0-4bf5-9f77-f7b246fa6680
dc.identifier.othervv_1032021
dc.identifier.urihttp://hdl.handle.net/20.500.12627/100484
dc.identifier.urihttps://doi.org/10.1007/s11029-018-9775-z
dc.description.abstractThe influence of bulk thickness curing time and type of the light-curing unit (quartz-tungsten-halogen [QTH] or LED one) on the microhardness of bulk-fill composites was investigated. Bulk-fill composites, Venus Bulk Fill and SonicFill, were tested for microhardness, and Solitaire 2 was used as a reference.
dc.language.isoeng
dc.subjectFizikokimya
dc.subjectPolimer Karakterizasyonu
dc.subjectTemel Bilimler
dc.subjectMühendislik ve Teknoloji
dc.subjectKimya
dc.subjectTemel Bilimler (SCI)
dc.subjectPOLİMER BİLİMİ
dc.subjectMalzeme Bilimi
dc.subjectMALZEME BİLİMİ, KOMPOZİTLER
dc.subjectMühendislik, Bilişim ve Teknoloji (ENG)
dc.subjectMühendislik
dc.subjectMEKANİK
dc.titleINFLUENCE OF BULK THICKNESS, CURING TIME, AND CURING UNIT TYPE ON THE MICROHARDNESS OF DIFFERENT-VISCOSITY BULK-FILL COMPOSITES
dc.typeMakale
dc.relation.journalMECHANICS OF COMPOSITE MATERIALS
dc.contributor.departmentİstanbul Üniversitesi , ,
dc.identifier.volume54
dc.identifier.issue5
dc.identifier.startpage675
dc.identifier.endpage684
dc.contributor.firstauthorID258366


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record