Show simple item record

dc.contributor.authorGezgin, Gizem Guzey
dc.contributor.authorOrhan, Gökhan
dc.date.accessioned2021-03-05T08:30:52Z
dc.date.available2021-03-05T08:30:52Z
dc.date.issued2011
dc.identifier.citationOrhan G., Gezgin G. G. , "Response Surface Modeling and Evaluation of the Influence of Deposition Parameters on the Electrolytic Cu-Sn Alloy Powders Production", METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, cilt.42, ss.771-782, 2011
dc.identifier.issn1073-5615
dc.identifier.otherav_9950ecc8-7136-45b9-8414-9617a60cd8bd
dc.identifier.othervv_1032021
dc.identifier.urihttp://hdl.handle.net/20.500.12627/103108
dc.identifier.urihttps://doi.org/10.1007/s11663-011-9510-9
dc.description.abstractIn this article, the electrodeposition process of Cu-Sn alloy powders from tripolyphosphate (TPP)-based electrolytes was investigated as a function of deposition parameters. The effects of deposition parameters such as current density, electrolyte composition (Cu/Sn mole ratio), mechanical stirring speed, and temperature on the Cu content of alloy powder and cathodic current efficiency were evaluated using the response surface methodology (RSM). The empirical models developed in terms of deposition parameters were found to be statistically adequate to describe the process responses. The study revealed that as far as the copper content was concerned in the alloyed powders, all parameters selected had positive correlations. However, a high stirring speed and low current density led to a greater current efficiency. The morphology and chemical composition of the electrodeposited Cu-Sn alloy powders were investigated using scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), and inductively coupled plasma (ICP) analysis. An SEM analysis showed that the powder morphology was affected considerably by the cathodic current density and stirring speed.
dc.language.isoeng
dc.subjectMühendislik, Bilişim ve Teknoloji (ENG)
dc.subjectMetalurji ve Malzeme Mühendisliği
dc.subjectMALZEME BİLİMİ, MULTIDISCIPLINARY
dc.subjectMalzeme Bilimi
dc.subjectMETALURJİ VE METALURJİ MÜHENDİSLİĞİ
dc.subjectMühendislik ve Teknoloji
dc.titleResponse Surface Modeling and Evaluation of the Influence of Deposition Parameters on the Electrolytic Cu-Sn Alloy Powders Production
dc.typeMakale
dc.relation.journalMETALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
dc.contributor.departmentİstanbul Üniversitesi , ,
dc.identifier.volume42
dc.identifier.issue4
dc.identifier.startpage771
dc.identifier.endpage782
dc.contributor.firstauthorID59786


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record