Basit öğe kaydını göster

dc.contributor.authorÖZTÜRK, Emel
dc.contributor.authorKOÇ, Küçük Hüseyin
dc.contributor.authorHAZIR, Ender
dc.contributor.authorŞEKER, Sedanur
dc.contributor.authorDİLİK, Tuncer
dc.contributor.authorERDİNLER, Emine Seda
dc.date.accessioned2021-03-05T10:53:22Z
dc.date.available2021-03-05T10:53:22Z
dc.identifier.citationHAZIR E., ŞEKER S., KOÇ K. H. , DİLİK T., ERDİNLER E. S. , ÖZTÜRK E., "Optimization of plasma treatment parameters to improve the wood-coating adhesion strength using Taguchi integrated desirability function approach", JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2020
dc.identifier.issn0169-4243
dc.identifier.otherav_a5733a90-500e-4420-a24e-b65866cb8136
dc.identifier.othervv_1032021
dc.identifier.urihttp://hdl.handle.net/20.500.12627/110660
dc.identifier.urihttps://doi.org/10.1080/01694243.2020.1816668
dc.description.abstractThe aim of this study is to enhance the coating adhesion strength by optimizing the air plasma application parameters. Air-plasma treatment parameters were selected as working distance, treatment speed and pressure, while material type parameters were determined as low mean density fiberboard (MDF-1) and high-density mean fiberboard (MDF-2). Due to the low adhesion strength in water-based paint applications compared to other types of paint, water-based paint was applied to these samples. Taguchi orthogonal design and analysis of variance (ANOVA) were applied to investigate the significant parameters on the adhesion strength. Desirability function was used to determine the optimum factor levels. According to experimental design results, working distance, treatment speed, and pressure values of 8.82 mm, 60 mm/s, and 1.10 bar were determined as optimum plasma treatment parameters for MDF-1, respectively. Corresponding values for MDF-2 were 9.19 mm, 60 mm/s, and 1.06 bar. The improvement in adhesion strength was evaluated as 22% increase for MDF-1 and 16% increase for MDF-2.
dc.language.isoeng
dc.subjectMÜHENDİSLİK, KİMYASAL
dc.subjectMühendislik
dc.subjectMühendislik, Bilişim ve Teknoloji (ENG)
dc.subjectMALZEME BİLİMİ, MULTIDISCIPLINARY
dc.subjectMalzeme Bilimi
dc.subjectMEKANİK
dc.subjectKimya Mühendisliği ve Teknolojisi
dc.subjectMühendislik ve Teknoloji
dc.titleOptimization of plasma treatment parameters to improve the wood-coating adhesion strength using Taguchi integrated desirability function approach
dc.typeMakale
dc.relation.journalJOURNAL OF ADHESION SCIENCE AND TECHNOLOGY
dc.contributor.departmentİstanbul Üniversitesi-Cerrahpaşa , Orman Fakültesi , Orman Endüstri Mühendisliği
dc.contributor.firstauthorID2286260


Bu öğenin dosyaları:

DosyalarBoyutBiçimGöster

Bu öğe ile ilişkili dosya yok.

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster