Basit öğe kaydını göster

Electrochemical Corrosion Behavior of TiN-Coated Biomedical Ti-Cu Alloy Foam in Fluoride Containing Artificial Saliva

dc.contributor.authorMutlu, Ilven
dc.date.accessioned2021-03-05T14:20:38Z
dc.date.available2021-03-05T14:20:38Z
dc.date.issued2014
dc.identifier.citationMutlu I., "Electrochemical Corrosion Behavior of TiN-Coated Biomedical Ti-Cu Alloy Foam in Fluoride Containing Artificial Saliva", METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, ss.3640-3649, 2014
dc.identifier.issn1073-5623
dc.identifier.othervv_1032021
dc.identifier.otherav_b6a94aa1-6745-4b46-9a89-d3223f40b3ba
dc.identifier.urihttp://hdl.handle.net/20.500.12627/121593
dc.identifier.urihttps://doi.org/10.1007/s11661-014-2264-7
dc.description.abstractHighly porous Ti-Cu alloy foams were produced by powder metallurgy method for implant applications. Ti-Cu alloys were prepared with 3, 5, 7, and 10 wt pct Cu contents in order to determine optimum Cu addition. Cu addition enhances sinterability, and the Ti-Cu compacts were sintered at lower temperatures and times than pure Ti. Specimens were coated with a TiN film to enhance wear and corrosion resistance. Sintered specimens were precipitation hardened (aged) in order to increase mechanical properties. Corrosion properties of foams were examined by electrochemical techniques, such as potentiodynamic polarization, cyclic polarization, Tafel extrapolation, linear polarization resistance, and open-circuit potential measurement. Effect of Cu content, TiN coating, pH, and fluoride content of artificial saliva on electrochemical corrosion behavior of specimens was investigated.
dc.language.isoeng
dc.subjectMalzeme Bilimi
dc.subjectMALZEME BİLİMİ, MULTIDISCIPLINARY
dc.subjectMühendislik, Bilişim ve Teknoloji (ENG)
dc.subjectMETALURJİ VE METALURJİ MÜHENDİSLİĞİ
dc.subjectMetalurji ve Malzeme Mühendisliği
dc.subjectMühendislik ve Teknoloji
dc.titleElectrochemical Corrosion Behavior of TiN-Coated Biomedical Ti-Cu Alloy Foam in Fluoride Containing Artificial Saliva
dc.typeMakale
dc.relation.journalMETALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
dc.contributor.departmentİstanbul Üniversitesi , Mühendislik Fakültesi , Metalurji Ve Malzeme Mühendisliği
dc.identifier.issue8
dc.identifier.startpage3640
dc.identifier.endpage3649
dc.contributor.firstauthorID79326


Bu öğenin dosyaları:

DosyalarBoyutBiçimGöster

Bu öğe ile ilişkili dosya yok.

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster