Show simple item record

dc.contributor.authorColak, Adnan
dc.date.accessioned2021-03-05T18:18:50Z
dc.date.available2021-03-05T18:18:50Z
dc.date.issued2006
dc.identifier.citationColak A., "A new model for the estimation of compressive strength of Portland cement concrete", CEMENT AND CONCRETE RESEARCH, cilt.36, ss.1409-1413, 2006
dc.identifier.issn0008-8846
dc.identifier.otherav_c9c0c94d-9bf5-4ad9-9bd2-a9ed65de6893
dc.identifier.othervv_1032021
dc.identifier.urihttp://hdl.handle.net/20.500.12627/133671
dc.identifier.urihttps://doi.org/10.1016/j.cemconres.2006.03.002
dc.description.abstractIn this article, on the basis of the existing experimental data, an empirical equation for calculating the compressive strength of Portland cement concrete is developed. The determination of the compressive strengths by the equation described here relies oil accurate determination of the water to cement ratio which gives maximum compressive strength and the analysis of its variation with the curing time. The results obtained for the plain (without admixture) and latex modified concretes at the age of 28 days show that this ratio ranges from 0.18 to 0.23. These values are reasonably close to the non-evaporable water content reported for the Portland cement. Oil the other hand, this range as determined by the above procedure limits the usefulness of the proposed equation for predicting the compressive strength of silica fume blended Portland cement concretes. However, a general method of solving problems of this type allows the determination of upper and lower bounds of this range. This method requires the measurement of at least two compressive strengths corresponding to two different water to cement ratios. (C) 2006 Elsevier Ltd. All rights reserved.
dc.language.isoeng
dc.subjectMühendislik, Bilişim ve Teknoloji (ENG)
dc.subjectMalzeme Bilimi
dc.subjectİnşaat Mühendisliği
dc.subjectYapı
dc.subjectMühendislik ve Teknoloji
dc.subjectİNŞAAT VE YAPI TEKNOLOJİSİ
dc.subjectMühendislik
dc.subjectMALZEME BİLİMİ, MULTIDISCIPLINARY
dc.titleA new model for the estimation of compressive strength of Portland cement concrete
dc.typeMakale
dc.relation.journalCEMENT AND CONCRETE RESEARCH
dc.contributor.departmentİstanbul Üniversitesi , Mühendislik Fakültesi , İnşaat Mühendisliği
dc.identifier.volume36
dc.identifier.issue7
dc.identifier.startpage1409
dc.identifier.endpage1413
dc.contributor.firstauthorID32517


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record