Basit öğe kaydını göster

Radiation-hardness measurements of high OH- content quartz fibres irradiated with 24 GeV protons up to 1.25 Grad

dc.contributor.authorOzok, F.
dc.contributor.authorSonmez, N.
dc.contributor.authorMerlo, J. P.
dc.contributor.authorOnel, Y.
dc.contributor.authorSchmidt, I.
dc.contributor.authorCankocak, K.
dc.contributor.authorBakirci, M. N.
dc.contributor.authorCerci, S.
dc.contributor.authorGulmez, E.
dc.date.accessioned2021-03-05T20:21:44Z
dc.date.available2021-03-05T20:21:44Z
dc.identifier.citationCankocak K., Bakirci M. N. , Cerci S., Gulmez E., Merlo J. P. , Onel Y., Ozok F., Schmidt I., Sonmez N., "Radiation-hardness measurements of high OH- content quartz fibres irradiated with 24 GeV protons up to 1.25 Grad", NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT, cilt.585, ss.20-27, 2008
dc.identifier.issn0168-9002
dc.identifier.othervv_1032021
dc.identifier.otherav_d3d8291b-1bb1-43d7-bc80-5495544ad365
dc.identifier.urihttp://hdl.handle.net/20.500.12627/139826
dc.identifier.urihttps://doi.org/10.1016/j.nima.2007.10.024
dc.description.abstractWe investigated the darkening of two high OH- content quartz fibres irradiated with 24 GeV protons at the Cern PS facility IRRAD. The two tested fibres have a 0.6 mm quartz core diameter, one with hard plastic cladding (qp) and the other with quartz cladding (qq). These fibres were exposed at about 1.25 Grad in 3 weeks. The fibres became opaque below 380 nm and in the range 580-650 nm. The darkening under irradiation and damage recovery after irradiation as a function of dose and time are similar to what we observed with electrons. The typical attenuation at 455 nm are 1.44 +/- 0.22 and 2.20 +/- 0.15 dB/m at 100 Mrad for qp and qq fibres, respectively. The maximum damage recovery is also observed near this wavelength. (c) 2007 Elsevier B.V. All rights reserved.
dc.language.isoeng
dc.subjectFİZİK, PARTİKLER VE ALANLAR
dc.subjectNükleer Fizik
dc.subjectTemel Parçacıklar ve Alanlar
dc.subjectTemel Bilimler
dc.subjectMühendislik ve Teknoloji
dc.subjectNÜKLEAR BİLİMİ VE TEKNOLOJİSİ
dc.subjectFizik
dc.subjectTemel Bilimler (SCI)
dc.subjectFİZİK, NÜKLEER
dc.subjectMühendislik, Bilişim ve Teknoloji (ENG)
dc.subjectMühendislik
dc.subjectALETLER & GÖSTERİM
dc.titleRadiation-hardness measurements of high OH- content quartz fibres irradiated with 24 GeV protons up to 1.25 Grad
dc.typeMakale
dc.relation.journalNUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT
dc.contributor.departmentThe University Of Iowa , ,
dc.identifier.volume585
dc.identifier.startpage20
dc.identifier.endpage27
dc.contributor.firstauthorID186325


Bu öğenin dosyaları:

DosyalarBoyutBiçimGöster

Bu öğe ile ilişkili dosya yok.

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster