dc.contributor.author | Teymen, A. | |
dc.contributor.author | ÖZDEMİR, METİN | |
dc.contributor.author | Bilim, C. | |
dc.contributor.author | ÖZCAN, Fatih | |
dc.contributor.author | ATİŞ, CENGİZ DURAN | |
dc.contributor.author | KARAHAN, ÖKKEŞ İBRAHİM | |
dc.contributor.author | KILIÇ, ALAETTİN | |
dc.date.accessioned | 2021-03-02T22:23:30Z | |
dc.date.available | 2021-03-02T22:23:30Z | |
dc.date.issued | 2008 | |
dc.identifier.citation | KILIÇ A., ATİŞ C. D. , Teymen A., KARAHAN Ö. İ. , ÖZCAN F., Bilim C., ÖZDEMİR M., "The influence of aggregate type on the strength and abrasion resistance of high strength concrete", CEMENT & CONCRETE COMPOSITES, cilt.30, sa.4, ss.290-296, 2008 | |
dc.identifier.issn | 0958-9465 | |
dc.identifier.other | vv_1032021 | |
dc.identifier.other | av_0c6dc7bc-6a73-4501-a842-cfb91c13ae5c | |
dc.identifier.uri | http://hdl.handle.net/20.500.12627/14004 | |
dc.identifier.uri | https://doi.org/10.1016/j.cemconcomp.2007.05.011 | |
dc.description.abstract | This paper examines the influence of aggregate type on the strength characteristics and abrasion resistance of high strength silica fume concrete. Five different aggregate types (gabbro, basalt, quartsite, limestone and sandstone) were used to produce high strength concrete containing silica fume. Silica fume replacement ratio with cement was 15% on a mass basis. Water-binder ratio was 0.35. The amount of hyperplasticizer was 4% of the binder content by mass. Gabbro concrete showed the highest compressive and flexural tensile strength and abrasion resistance, while sandstone showed the lowest compressive and flexural tensile strength and abrasion resistance. High abrasion resistant aggregate produced a concrete with high abrasion resistance. | |
dc.language.iso | eng | |
dc.subject | Mühendislik | |
dc.subject | İNŞAAT VE YAPI TEKNOLOJİSİ | |
dc.subject | Mühendislik, Bilişim ve Teknoloji (ENG) | |
dc.subject | MALZEME BİLİMİ, KOMPOZİTLER | |
dc.subject | Malzeme Bilimi | |
dc.subject | İnşaat Mühendisliği | |
dc.subject | Yapı | |
dc.subject | Mühendislik ve Teknoloji | |
dc.title | The influence of aggregate type on the strength and abrasion resistance of high strength concrete | |
dc.type | Makale | |
dc.relation.journal | CEMENT & CONCRETE COMPOSITES | |
dc.contributor.department | Erciyes Üniversitesi , Mühendislik Fakültesi , İnşaat Mühendisliği | |
dc.identifier.volume | 30 | |
dc.identifier.issue | 4 | |
dc.identifier.startpage | 290 | |
dc.identifier.endpage | 296 | |
dc.contributor.firstauthorID | 58128 | |