Basit öğe kaydını göster

Comparative study of the fatigue strength of five acrylic denture resins

dc.contributor.authorGurbuz, Ozlem
dc.contributor.authorUnalan, Fatma
dc.contributor.authorDikbas, Idil
dc.date.accessioned2021-03-06T09:41:07Z
dc.date.available2021-03-06T09:41:07Z
dc.date.issued2010
dc.identifier.citationGurbuz O., Unalan F., Dikbas I., "Comparative study of the fatigue strength of five acrylic denture resins", JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS, cilt.3, ss.636-639, 2010
dc.identifier.issn1751-6161
dc.identifier.othervv_1032021
dc.identifier.otherav_e6b4a59d-746b-4093-a044-0dde2aba32fb
dc.identifier.urihttp://hdl.handle.net/20.500.12627/151751
dc.identifier.urihttps://doi.org/10.1016/j.jmbbm.2010.06.005
dc.description.abstractThe aim of this in vitro study was to compare the fatigue resistance of three kinds of heat-polymerized acrylic resins (conventional heat-polymerized, rapid heat-polymerized, high impact acrylic resin), a kind of visible light-cured resin and a kind of self-cured acrylic resin. A total of 60 notched and un-notched specimens (65 mm x 10 mm x 3 mm) were fabricated, 12 from each material. The fatigue resistance was measured by applying repeated three-point bending deflection to the specimens. For statistical analysis, Kruskal-Wallis test followed by Dunn's multiple comparison tests were used. The Kruskal-Wallis test revealed significant differences in the fatigue resistance among some groups (p 0.05). High impact acrylic resin was also found to have significantly higher fatigue resistance value than that of self-cured resin and light-cured resin (p 0.05). (C) 2010 Elsevier Ltd. All rights reserved.
dc.language.isoeng
dc.subjectMühendislik ve Teknoloji
dc.subjectBiyomedikal Mühendisliği
dc.subjectMalzeme Bilimi
dc.subjectMALZEME BİLİMİ, BİYOMATERYAL
dc.subjectMühendislik, Bilişim ve Teknoloji (ENG)
dc.subjectMühendislik
dc.subjectMÜHENDİSLİK, BİYOMEDİKSEL
dc.titleComparative study of the fatigue strength of five acrylic denture resins
dc.typeMakale
dc.relation.journalJOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS
dc.contributor.departmentIstanbul Bakirkoy Mental Health & Neurology Training & Research Hospital , ,
dc.identifier.volume3
dc.identifier.issue8
dc.identifier.startpage636
dc.identifier.endpage639
dc.contributor.firstauthorID19879


Bu öğenin dosyaları:

DosyalarBoyutBiçimGöster

Bu öğe ile ilişkili dosya yok.

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster