Basit öğe kaydını göster

dc.contributor.authorBilir, Turhan
dc.contributor.authorTopcu, Ilker Bekir
dc.date.accessioned2021-03-06T12:55:41Z
dc.date.available2021-03-06T12:55:41Z
dc.date.issued2010
dc.identifier.citationTopcu I. B. , Bilir T., "Effect of Non-Ground-Granulated Blast-Furnace Slag as Fine Aggregate on Shrinkage Cracking of Mortars", ACI MATERIALS JOURNAL, cilt.107, ss.545-553, 2010
dc.identifier.issn0889-325X
dc.identifier.otherav_f638fe2b-fe3a-4855-a08f-7bb462426d64
dc.identifier.othervv_1032021
dc.identifier.urihttp://hdl.handle.net/20.500.12627/161325
dc.description.abstractIn this study, the effect of non-ground-granulated blast-furnace slag (n-GGBS) as fine aggregate in mortars on shrinkage cracking was investigated. The n-GGBS replaced fine aggregate by weight. The replacement ratios ranged from 0 to 100% in increments of 10%. Unit weight, ultrasonic pulse velocity, flexural strength, compressive strength, and length change due to free shrinkage were determined by producing prismatic mortar specimens for each series. The moduli of elasticity were also determined by producing cubic mortar specimens. The ring test was conducted to determine the effect of n-GGBS on shrinkage cracking. The length and width of the cracks that occurred during the ring test were measured using an optical microscope and a caliper Consequently, it was observed that the increase in n-GGBS content decreased shrinkage cracking because of the porous structure of mortar specimens related to the structure of n-GGBS. Furthermore, the flexural strength, compressive strength, and modulus of elasticity also decreased for the same reason.
dc.language.isoeng
dc.subjectİnşaat Mühendisliği
dc.subjectYapı
dc.subjectMühendislik ve Teknoloji
dc.subjectMALZEME BİLİMİ, MULTIDISCIPLINARY
dc.subjectMalzeme Bilimi
dc.subjectMühendislik, Bilişim ve Teknoloji (ENG)
dc.subjectMühendislik
dc.subjectİNŞAAT VE YAPI TEKNOLOJİSİ
dc.titleEffect of Non-Ground-Granulated Blast-Furnace Slag as Fine Aggregate on Shrinkage Cracking of Mortars
dc.typeMakale
dc.relation.journalACI MATERIALS JOURNAL
dc.contributor.departmentEskişehir Osmangazi Üniversitesi , ,
dc.identifier.volume107
dc.identifier.issue6
dc.identifier.startpage545
dc.identifier.endpage553
dc.contributor.firstauthorID104607


Bu öğenin dosyaları:

DosyalarBoyutBiçimGöster

Bu öğe ile ilişkili dosya yok.

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster