Show simple item record

dc.contributor.authorGunes, Onur
dc.contributor.authorSarib, Ali
dc.contributor.authorAltunsu, Elif
dc.date.accessioned2021-12-10T09:59:47Z
dc.date.available2021-12-10T09:59:47Z
dc.date.issued2021
dc.identifier.citationGunes O., Altunsu E., Sarib A., "Special cases in fatigue analysis of wind turbines", WIND AND STRUCTURES, cilt.32, sa.5, ss.501-508, 2021
dc.identifier.issn1226-6116
dc.identifier.otherav_20cfeee3-c504-44e4-9381-8ae50af2a7f4
dc.identifier.othervv_1032021
dc.identifier.urihttp://hdl.handle.net/20.500.12627/168950
dc.identifier.urihttps://doi.org/10.12989/was.2021.32.5.501
dc.description.abstractThe turbine industry demands a reliable design with affordable cost. As technological advances begin to support turbines of huge sizes, and the increasing importance of wind turbines from day to day make design safety conditions more important. Wind turbines are exposed to environmental conditions that can affect their installation, durability, and operation. International Electrotechnical Commission (IEC) 61400-1 design load cases consist of analyses involving wind turbine operating conditions. This design load cases (DLC) is important for determining fatigue loads (i.e., forces and moments) that occur as a result of expected conditions throughout the life of the machine. With the help of FAST (Fatigue, Aerodynamics, Structures, and Turbulence), an open source software, the NREL 5MW land base wind turbine model was used. IEC 61400-1 wind turbine design standard procedures assessed turbine behavior and fatigue damage to the tower base of dynamic loads in different design conditions. Real characteristic wind speed distribution and multi-directional effect specific to the site were taken into consideration. The effect of these conditions on the economic service life of the turbine has been studied.
dc.language.isoeng
dc.subjectMühendislik ve Teknoloji
dc.subjectGeneral Engineering
dc.subjectEngineering (miscellaneous)
dc.subjectBuilding and Construction
dc.subjectCivil and Structural Engineering
dc.subjectPhysical Sciences
dc.subjectİnşaat Mühendisliği
dc.subjectYapı
dc.subjectMEKANİK
dc.subjectMÜHENDİSLİK, SİVİL
dc.subjectMühendislik, Bilişim ve Teknoloji (ENG)
dc.subjectMühendislik
dc.subjectİNŞAAT VE YAPI TEKNOLOJİSİ
dc.titleSpecial cases in fatigue analysis of wind turbines
dc.typeMakale
dc.relation.journalWIND AND STRUCTURES
dc.contributor.departmentİstanbul Teknik Üniversitesi , ,
dc.identifier.volume32
dc.identifier.issue5
dc.identifier.startpage501
dc.identifier.endpage508
dc.contributor.firstauthorID2645845


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record