Basit öğe kaydını göster

dc.contributor.authorUĞURLU, Ömer Faruk
dc.contributor.authorOzturk, C. Atilla
dc.date.accessioned2021-12-10T12:23:15Z
dc.date.available2021-12-10T12:23:15Z
dc.date.issued2021
dc.identifier.citationUĞURLU Ö. F. , Ozturk C. A. , "Experimental investigation for the use of tailings as paste-fill material through design of experiment", GEOMECHANICS AND ENGINEERING, cilt.26, sa.5, ss.465-475, 2021
dc.identifier.issn2005-307X
dc.identifier.otherav_b96489f1-2a25-4fd5-a4f6-5a9180706c23
dc.identifier.othervv_1032021
dc.identifier.urihttp://hdl.handle.net/20.500.12627/173780
dc.identifier.urihttps://doi.org/10.12989/gae.2021.26.5.465
dc.description.abstractIn the mining industry, significant progress and increased mineral production cause waste disposal issues which is one of the crucial problems in mining operations. It leads to both environmental and economic issues. Particularly, wastes from the production of metallic sulfide ore cause serious environmental pollution. In the last three decades, waste has been stored in underground openings in a controlled manner as paste-fill. Paste-fill is created by waste, water, and chemical additives. In this paper, two types of wastes were chosen to investigate the usability of tailings as paste-fill material. A lead and zinc underground mine was selected as a research site located in Balikesir, Turkey. First of all, several tests were conducted to analyze the physical, chemical, and mineralogical characteristics of paste-fill materials. Then, one of the design of experiment methods was used to create different mixtures of paste-fill specimens by changing the binder ratio and water content as input variables for four curing times. Finally, the strength properties were obtained as output variables, and an optimum mixture of paste-fill was determined. The results show that the tailings can be used as paste-fill material to achieve environmental and economic benefits and provide a safe working environment.
dc.language.isoeng
dc.subjectCivil and Structural Engineering
dc.subjectPhysical Sciences
dc.subjectMühendislik ve Teknoloji
dc.subjectEngineering (miscellaneous)
dc.subjectGeneral Engineering
dc.subjectİnşaat Mühendisliği
dc.subjectMÜHENDİSLİK, JEOLOJİK
dc.subjectMühendislik, Bilişim ve Teknoloji (ENG)
dc.subjectMühendislik
dc.subjectMÜHENDİSLİK, SİVİL
dc.titleExperimental investigation for the use of tailings as paste-fill material through design of experiment
dc.typeMakale
dc.relation.journalGEOMECHANICS AND ENGINEERING
dc.contributor.departmentİstanbul Üniversitesi-Cerrahpaşa , Mühendislik Fakültesi , Maden Mühendisliği Bölümü
dc.identifier.volume26
dc.identifier.issue5
dc.identifier.startpage465
dc.identifier.endpage475
dc.contributor.firstauthorID2750235


Bu öğenin dosyaları:

DosyalarBoyutBiçimGöster

Bu öğe ile ilişkili dosya yok.

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster