Basit öğe kaydını göster

dc.contributor.authorÜrgen, Mustafa Kamil
dc.contributor.authorTatar, Beyhan
dc.contributor.authorGokdemir, F. P.
dc.contributor.authorPehlivan, E.
dc.date.accessioned2022-02-18T11:13:45Z
dc.date.available2022-02-18T11:13:45Z
dc.identifier.citationTatar B., Gokdemir F. P. , Pehlivan E., Ürgen M. K. , "The influence of Er3+ doping on the structural and optical properties of CeO2 thin films grown by PED", APPLIED SURFACE SCIENCE, cilt.285, ss.409-416, 2013
dc.identifier.issn0169-4332
dc.identifier.othervv_1032021
dc.identifier.otherav_e058d0e9-17bb-499c-b223-b59037a62316
dc.identifier.urihttp://hdl.handle.net/20.500.12627/180708
dc.identifier.urihttps://doi.org/10.1016/j.apsusc.2013.08.068
dc.description.abstractErbium doped CeO2 thin films were deposited on both Corning glass substrates and indium doped tin oxide (ITO) coated glass substrates by pulsed e-beam deposition (PED) method at room temperature. Structural features of Er doped CeO2 thin films were studied with X-ray diffraction (XRD) and micro-Raman spectra. The XRD patterns of all films showed polycrystalline nature and cubic crystalline structure. Raman active peaks for both undoped CeO2 and Er doped CeO2 films were determined at similar to 465 cm(-1). The Raman shift observed in this study can also be assigned to Raman active modes of CeO2 that are shifted from the original position due to different doping concentration. The optical properties of CeO2 films and Er doped CeO2 films, which were determined from transmittance and reflectance measurements at room temperature, were very similar in character. The refractive indices and extinction coefficients, which were calculated from 3.5 to 1.25 eV (300-1000 nm), were between 1.5-3 and 0.05-0.2, respectively. The optical band gaps were deduced from the absorption coefficient according to solid band theory. The electrochromic measurements revealed that 2% Er doped CeO2 films grown on ITO + WO3 substrates had highest charge density compared to the other samples. Long-time cyclic voltammetry (CV) and chronoamperometry (CA) measurements were carried out to investigate the stability of this film. (C) 2013 Elsevier B.V. All rights reserved.
dc.language.isoeng
dc.subjectElectronic, Optical and Magnetic Materials
dc.subjectChemistry (miscellaneous)
dc.subjectGeneral Materials Science
dc.subjectGeneral Chemistry
dc.subjectPhysical and Theoretical Chemistry
dc.subjectSurfaces, Coatings and Films
dc.subjectPhysical Sciences
dc.subjectFizik
dc.subjectMALZEME BİLİMİ, KAPLAMALAR VE FİLMLER
dc.subjectMalzeme Bilimi
dc.subjectMühendislik, Bilişim ve Teknoloji (ENG)
dc.subjectFİZİK, UYGULAMALI
dc.subjectTemel Bilimler (SCI)
dc.subjectKİMYA, FİZİKSEL
dc.subjectKimya
dc.subjectFİZİK, YOĞUN MADDE
dc.subjectYoğun Madde 1:Yapısal, Mekanik ve Termal Özellikler
dc.subjectFizikokimya
dc.subjectTemel Bilimler
dc.subjectMühendislik ve Teknoloji
dc.subjectCondensed Matter Physics
dc.subjectSurfaces and Interfaces
dc.subjectStatistical and Nonlinear Physics
dc.titleThe influence of Er3+ doping on the structural and optical properties of CeO2 thin films grown by PED
dc.typeMakale
dc.relation.journalAPPLIED SURFACE SCIENCE
dc.contributor.departmentTekirdağ Namık Kemal Üniversitesi , ,
dc.identifier.volume285
dc.identifier.startpage409
dc.identifier.endpage416
dc.contributor.firstauthorID3051035


Bu öğenin dosyaları:

DosyalarBoyutBiçimGöster

Bu öğe ile ilişkili dosya yok.

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster