Basit öğe kaydını göster

Volatile organic compound detection performance of Borophene and PANI:beta Borophene nanocomposite-based sensors

dc.contributor.authorTEKER, MURAT
dc.contributor.authorTAŞALTIN, NEVİN
dc.contributor.authorTasaltin, Cihat
dc.contributor.authorGungor, Saliha
dc.contributor.authorKARAKUŞ, SELCAN
dc.contributor.authorGurol, Ilke
dc.date.accessioned2023-02-21T07:47:08Z
dc.date.available2023-02-21T07:47:08Z
dc.date.issued2022
dc.identifier.citationTAŞALTIN N., Tasaltin C., Gungor S., KARAKUŞ S., Gurol I., TEKER M., "Volatile organic compound detection performance of Borophene and PANI:beta Borophene nanocomposite-based sensors", JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, cilt.33, sa.31, ss.24173-24181, 2022
dc.identifier.issn0957-4522
dc.identifier.otherav_0d6d395f-c685-481c-a9fd-fd51ecf305ba
dc.identifier.othervv_1032021
dc.identifier.urihttp://hdl.handle.net/20.500.12627/186103
dc.identifier.urihttps://doi.org/10.1007/s10854-022-09109-5
dc.description.abstractIn this study, Borophene and PANI:Borophene nanocomposite were prepared using a low cost and simple sonication method. The prepared PANI:beta Borophene nanocomposite-based sensor has a higher response than the Borophene-based sensor against volatile organic compounds (VOCs). Both the beta Borophene-based sensor and PANI:beta Borophene nanocomposite sensor were selectively detected ethanol. The results reveal that limit of detection of the prepared beta Borophene-based sensor and PANI:beta Borophene nanocomposite sensor was 1000 and 60 ppm, respectively. The response time of the PANI:Borophene nanocomposite-based sensor was 40 s and the recovery time of the sensor was 12 s at 1200 ppm ethanol. The selective and rapid detection of the prepared PANI:Borophene nanocomposite-based sensor is impressive. PANI:beta Borophene nanocomposite-based sensor has a great potential for future applications in high-performance VOC detectors.
dc.language.isoeng
dc.subjectElektronik, Optik ve Manyetik Malzemeler
dc.subjectGenel Malzeme Bilimi
dc.subjectGenel Mühendislik
dc.subjectMühendislik (çeşitli)
dc.subjectFizik Bilimleri
dc.subjectElektrik ve Elektronik Mühendisliği
dc.subjectMÜHENDİSLİK, ELEKTRİK VE ELEKTRONİK
dc.subjectMühendislik
dc.subjectMühendislik, Bilişim ve Teknoloji (ENG)
dc.subjectMALZEME BİLİMİ, ÇOKDİSİPLİNLİ
dc.subjectMalzeme Bilimi
dc.subjectFİZİK, UYGULAMALI
dc.subjectFizik
dc.subjectTemel Bilimler (SCI)
dc.subjectFİZİK, YOĞUN MADDE
dc.subjectBilgi Sistemleri, Haberleşme ve Kontrol Mühendisliği
dc.subjectSinyal İşleme
dc.subjectYoğun Madde 1:Yapısal, Mekanik ve Termal Özellikler
dc.subjectTemel Bilimler
dc.subjectMühendislik ve Teknoloji
dc.subjectİstatistiksel ve Doğrusal Olmayan Fizik
dc.subjectYoğun Madde Fiziği
dc.subjectMetaller ve Alaşımlar
dc.subjectMalzeme Kimyası
dc.titleVolatile organic compound detection performance of Borophene and PANI:beta Borophene nanocomposite-based sensors
dc.typeMakale
dc.relation.journalJOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
dc.contributor.departmentMaltepe Üniversitesi , ,
dc.identifier.volume33
dc.identifier.issue31
dc.identifier.startpage24173
dc.identifier.endpage24181
dc.contributor.firstauthorID4065557


Bu öğenin dosyaları:

DosyalarBoyutBiçimGöster

Bu öğe ile ilişkili dosya yok.

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster