Basit öğe kaydını göster

dc.contributor.authorAkbay, Habibe Elif Gulsen
dc.contributor.authorDİZGE, NADİR
dc.contributor.authorAkarsu, Ceyhun
dc.contributor.authorBelibagli, Pinar
dc.contributor.authorIsik, Zelal
dc.date.accessioned2023-02-21T08:49:39Z
dc.date.available2023-02-21T08:49:39Z
dc.identifier.citationAkbay H. E. G., Akarsu C., Isik Z., Belibagli P., DİZGE N., "Investigation of degradation potential of polyethylene microplastics in anaerobic digestion process using cosmetics industry wastewater", BIOCHEMICAL ENGINEERING JOURNAL, cilt.187, 2022
dc.identifier.issn1369-703X
dc.identifier.othervv_1032021
dc.identifier.otherav_22ab3fb6-274f-49d5-a4f1-49b6e39d515d
dc.identifier.urihttp://hdl.handle.net/20.500.12627/186999
dc.identifier.urihttps://doi.org/10.1016/j.bej.2022.108619
dc.description.abstractIn this study, the effect of polyethylene (PE) microplastics (MPs) with different sizes (150 mu m and 50 mu m) and abundances (1 g/L, 2 g/L, and 4 g/L) on the anaerobic digestion (AD) of the cosmetic industry wastewater (CoIW) was investigated. The results showed that 50 mu m PE-MPs did not significantly affect the cumulative biogas production compared to the control. On the other hand, three different scenarios were observed considering the different abundances of 150 mu m PE-MPs. The 150 mu m of PE-MPs at 4 g/L showed the most adverse effect on AD and cumulative biogas production was significantly inhibited and decreased by approxi-mately 7 % compared to the control group, while cumulative biogas production increased by approximately 12 % at 1 g/L MP abundance. Removal of sCOD averaged 52-53 % for all abundances of 50 mu m MPs. For 150 mu m MPs, the sCOD removals for 1 g/L, 2 g/L, and 4 g/L were determined as 52 %, 58 %, and 56 %, respectively. Model -based analysis indicated that 50 mu m PE-MPs at all MP abundances decreased the control's hydrolysis coefficient (k). The inhibition of biogas production potential could be attributed to smaller-sized MPs having larger surface areas, so they adsorb more inhibitors in the medium and thus limit the activity of anaerobic microorganisms. In support of this, SEM results indicated that 150 mu m PE-MPs surfaces possessed more erosions and grooves.
dc.language.isoeng
dc.subjectKimya Mühendisliği ve Teknolojisi
dc.subjectYaşam Bilimleri
dc.subjectBiyoteknoloji
dc.subjectTemel Bilimler
dc.subjectMühendislik ve Teknoloji
dc.subjectUygulamalı Mikrobiyoloji ve Biyoteknoloji
dc.subjectGenel Mühendislik
dc.subjectMühendislik (çeşitli)
dc.subjectAkışkan Akışı ve Transfer İşlemleri
dc.subjectKolloid ve Yüzey Kimyası
dc.subjectKimyasal Sağlık ve Güvenlik
dc.subjectKataliz
dc.subjectKimya Mühendisliği (çeşitli)
dc.subjectMühendislik
dc.subjectMoleküler Tıp
dc.subjectFizik Bilimleri
dc.subjectGenel Kimya Mühendisliği
dc.subjectMühendislik, Bilişim ve Teknoloji (ENG)
dc.subjectMÜHENDİSLİK, KİMYASAL
dc.subjectYaşam Bilimleri (LIFE)
dc.subjectMikrobiyoloji
dc.subjectBİYOTEKNOLOJİ VE UYGULAMALI MİKROBİYOLOJİ
dc.titleInvestigation of degradation potential of polyethylene microplastics in anaerobic digestion process using cosmetics industry wastewater
dc.typeMakale
dc.relation.journalBIOCHEMICAL ENGINEERING JOURNAL
dc.contributor.departmentMersin Üniversitesi , ,
dc.identifier.volume187
dc.contributor.firstauthorID4065684


Bu öğenin dosyaları:

DosyalarBoyutBiçimGöster

Bu öğe ile ilişkili dosya yok.

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster