Tribological Analysis of Jute/Coir Polyester Composites Filled with Eggshell Powder (ESP) or Nanoclay (NC) Using Grey Rational Method

Abstract

The wear performance of jute/coir unsaturated polyester composites, filled with eggshell powder (ESP) and nanoclay (NC), were examined, concentrating on two measured parameters, coefficient of friction (COF) and wear rate (WR). To assess the possibilities of this material, a Taguchi study, based on grey relational analysis (GRA), was carried out, based on three testing parameters of the wear performance, load (10, 20, and 30 N), speed (100, 150, and 200 rpm), and sliding distance (30, 40, and 50 m). The material showed promising characteristics especially at high load, low speed, and high sliding distance. When comparing the respective influence of the three different parameters, the speed proved to be the most critical, this suggested the possible application of the biocomposite only for very low values of it. On the other hand, it was also elucidated that the presence and interfacial adhesion of the two fillers considerably hindered the formation of ploughing during wear test, despite the fact that degradation might be continuous and critical as far as loading progresses.