Basit öğe kaydını göster

Bending strength and modulus of elasticity of wood-based panels at cold and moderate temperatures

dc.contributor.authorAs, Nusret
dc.contributor.authorAyrilmis, Nadir
dc.contributor.authorBuyuksari, Umit
dc.date.accessioned2021-03-03T13:21:13Z
dc.date.available2021-03-03T13:21:13Z
dc.identifier.citationAyrilmis N., Buyuksari U., As N., "Bending strength and modulus of elasticity of wood-based panels at cold and moderate temperatures", COLD REGIONS SCIENCE AND TECHNOLOGY, cilt.63, ss.40-43, 2010
dc.identifier.issn0165-232X
dc.identifier.othervv_1032021
dc.identifier.otherav_337f9ef8-bb63-4175-b56c-e8ab845d5ff0
dc.identifier.urihttp://hdl.handle.net/20.500.12627/38880
dc.identifier.urihttps://doi.org/10.1016/j.coldregions.2010.05.004
dc.description.abstractInfluence of the temperature on the bending strength (BS) and modulus of elasticity (MOE) of three types of commercial wood-based panels (plywood, medium density fiberboard (MDF), and oriented strandboard (OSB)) was investigated at temperatures between -30 degrees C and +30 degrees C. The BS and MOE of the panels decreased with increasing temperature. Significant differences (p<0.01) were observed in both the BS and MOE of the panels. The strength properties of the panels changed more at positive temperatures than at negative temperatures. For example, when the temperature increased from 30 degrees C to 0 degrees C, the BS and MOE parallel to the plywood face grain were decreased by 9.8% and 7.4% while they were decreased by 12.5% and 9.6% when the temperature increased from 0 degrees C to +30 degrees C. Similar results were also observed for the MDF and OSB panels. (C) 2010 Elsevier B.V. All rights reserved.
dc.language.isoeng
dc.subjectJEOLOJİ
dc.subjectJeoloji Mühendisliği
dc.subjectİnşaat Mühendisliği
dc.subjectMühendislik ve Teknoloji
dc.subjectMÜHENDİSLİK, SİVİL
dc.subjectYER BİLİMİ, MULTİDİSİPLİNER
dc.subjectYerbilimleri
dc.subjectTemel Bilimler (SCI)
dc.subjectMühendislik, Bilişim ve Teknoloji (ENG)
dc.subjectMühendislik
dc.subjectMÜHENDİSLİK, ÇEVRE
dc.titleBending strength and modulus of elasticity of wood-based panels at cold and moderate temperatures
dc.typeMakale
dc.relation.journalCOLD REGIONS SCIENCE AND TECHNOLOGY
dc.contributor.departmentİstanbul Üniversitesi , ,
dc.identifier.volume63
dc.identifier.startpage40
dc.identifier.endpage43
dc.contributor.firstauthorID72023


Bu öğenin dosyaları:

DosyalarBoyutBiçimGöster

Bu öğe ile ilişkili dosya yok.

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster