Basit öğe kaydını göster

Characterization of Heat Treated Titanium-Based Implants by Nondestructive Eddy Current and Ultrasonic Tests

dc.contributor.authorEkinci, Sinasi
dc.contributor.authorMutlu, Ilven
dc.contributor.authorOktay, Enver
dc.date.accessioned2021-03-03T16:32:42Z
dc.date.available2021-03-03T16:32:42Z
dc.date.issued2014
dc.identifier.citationMutlu I., Ekinci S., Oktay E., "Characterization of Heat Treated Titanium-Based Implants by Nondestructive Eddy Current and Ultrasonic Tests", JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, cilt.23, sa.6, ss.2083-2091, 2014
dc.identifier.issn1059-9495
dc.identifier.otherav_44d413e4-263a-4f35-8eb1-82665cbbe23d
dc.identifier.othervv_1032021
dc.identifier.urihttp://hdl.handle.net/20.500.12627/49942
dc.identifier.urihttps://doi.org/10.1007/s11665-014-0986-8
dc.description.abstractThis study presents nondestructive characterization of microstructure and mechanical properties of heat treated Ti, Ti-Cu, and Ti-6Al-4V titanium-based alloys and 17-4 PH stainless steel alloy for biomedical implant applications. Ti, Ti-Cu, and 17-4 PH stainless steel based implants were produced by powder metallurgy. Ti-6Al-4V alloy was investigated as bulk wrought specimens. Effects of sintering temperature, aging, and grain size on mechanical properties were investigated by nondestructive and destructive tests comparatively. Ultrasonic velocity in specimens was measured by using pulse-echo and transmission methods. Electrical conductivity of specimens was determined by eddy current tests. Determination of Young's modulus and strength is important in biomedical implants. Young's modulus of specimens was calculated by using ultrasonic velocities. Calculated Young's modulus values were compared and correlated with experimental values.
dc.language.isoeng
dc.subjectMühendislik, Bilişim ve Teknoloji (ENG)
dc.subjectMühendislik ve Teknoloji
dc.subjectMALZEME BİLİMİ, MULTIDISCIPLINARY
dc.subjectMalzeme Bilimi
dc.titleCharacterization of Heat Treated Titanium-Based Implants by Nondestructive Eddy Current and Ultrasonic Tests
dc.typeMakale
dc.relation.journalJOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
dc.contributor.departmentMinistry of Energy & Natural Resources - Turkey , ,
dc.identifier.volume23
dc.identifier.issue6
dc.identifier.startpage2083
dc.identifier.endpage2091
dc.contributor.firstauthorID29895


Bu öğenin dosyaları:

DosyalarBoyutBiçimGöster

Bu öğe ile ilişkili dosya yok.

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster