Basit öğe kaydını göster

AN EXPERIMENTAL STUDY ON FRICTION DRILLING OF ST12 STEEL

dc.contributor.authorBeylergil, Bertan
dc.contributor.authorAktas, Alaattin
dc.contributor.authorAkyildiz, Hamza K.
dc.contributor.authorKaya, Mehmet Tuncay
dc.date.accessioned2021-03-03T19:13:27Z
dc.date.available2021-03-03T19:13:27Z
dc.date.issued2014
dc.identifier.citationKaya M. T. , Aktas A., Beylergil B., Akyildiz H. K. , "AN EXPERIMENTAL STUDY ON FRICTION DRILLING OF ST12 STEEL", TRANSACTIONS OF THE CANADIAN SOCIETY FOR MECHANICAL ENGINEERING, cilt.38, sa.3, ss.319-329, 2014
dc.identifier.issn0315-8977
dc.identifier.othervv_1032021
dc.identifier.otherav_5363fbad-a328-4c38-9d34-52e135559a08
dc.identifier.urihttp://hdl.handle.net/20.500.12627/59125
dc.description.abstractThe aim of this study is to investigate the effects of drilling parameters such as friction angle, friction contact area ratio (FCAR), feed rate and spindle speed on workpiece surface temperature, thrust force and torque in friction drilling of ST12 material. The tool material is tungsten carbide coated with TiN treatment. Experimental results reveal that the thrust force and torque increases gradually with increasing friction angle, feed rate and FCAR. On the other hand, the thrust force and torque decreases with increasing drilling speed. It is found that drilling speed has an important effect on the workpiece surface temperature. As the drilling speed increases, the workpiece surface temperature increases. Increasing or decreasing the friction angle and FCAR has no significant effect on the workpiece surface temperature.
dc.language.isoeng
dc.subjectMühendislik ve Teknoloji
dc.subjectZiraat
dc.subjectTarım Alet ve Makineleri
dc.subjectTarım Makineleri
dc.subjectTarımsal Bilimler
dc.subjectMühendislik, Bilişim ve Teknoloji (ENG)
dc.subjectMühendislik
dc.subjectMÜHENDİSLİK, MEKANİK
dc.titleAN EXPERIMENTAL STUDY ON FRICTION DRILLING OF ST12 STEEL
dc.typeMakale
dc.relation.journalTRANSACTIONS OF THE CANADIAN SOCIETY FOR MECHANICAL ENGINEERING
dc.contributor.departmentYozgat Bozok Üniversitesi , ,
dc.identifier.volume38
dc.identifier.issue3
dc.identifier.startpage319
dc.identifier.endpage329
dc.contributor.firstauthorID66233


Bu öğenin dosyaları:

DosyalarBoyutBiçimGöster

Bu öğe ile ilişkili dosya yok.

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster