Basit öğe kaydını göster

Localised corrosion behaviour of biomedical implant materials using electrochemical potentiokinetic reactivation and critical pitting potential methods

dc.contributor.authorMutlu, I.
dc.contributor.authorOktay, Enver
dc.date.accessioned2021-03-03T20:22:52Z
dc.date.available2021-03-03T20:22:52Z
dc.date.issued2015
dc.identifier.citationMutlu I., Oktay E., "Localised corrosion behaviour of biomedical implant materials using electrochemical potentiokinetic reactivation and critical pitting potential methods", CORROSION ENGINEERING SCIENCE AND TECHNOLOGY, cilt.50, sa.1, ss.72-79, 2015
dc.identifier.issn1478-422X
dc.identifier.othervv_1032021
dc.identifier.otherav_599ec70d-16eb-499c-bb6c-d38c40d164ab
dc.identifier.urihttp://hdl.handle.net/20.500.12627/63047
dc.identifier.urihttps://doi.org/10.1179/1743278214y.0000000192
dc.description.abstractIn this study, localised corrosion properties of the biomedical grade Ti-Nb-Cu alloy and AISI 316 austenitic stainless steel specimens were investigated. Ti-Nb-Cu alloy specimens were produced by powder metallurgy method. Nb was used for beta-phase Ti stabiliser. Beta-Ti phase has low Young's modulus close to bone, higher wear resistance and biocompatibility. Cu was added to enhance sinterability of the Ti-Nb-Cu alloy; in addition, Cu is antibacterial. The AISI 316 austenitic stainless steel alloy was investigated as wrought (fully dense) specimens. Localised corrosion properties of the Ti-Nb-Cu and AISI 316 stainless steel alloys were examined by electrochemical potentiokinetic reactivation, critical pitting potential and Tsujikawa-Hisamatsu electrochemical tests in Hank's simulated body fluid solution. Effect of the Cu content of the Ti-Nb-Cu alloys and pH level of the simulated body fluid on the corrosion behaviour of the specimens was studied.
dc.language.isoeng
dc.subjectMetalurji ve Malzeme Mühendisliği
dc.subjectMETALURJİ VE METALURJİ MÜHENDİSLİĞİ
dc.subjectMühendislik ve Teknoloji
dc.subjectMühendislik, Bilişim ve Teknoloji (ENG)
dc.subjectMalzeme Bilimi
dc.subjectMALZEME BİLİMİ, MULTIDISCIPLINARY
dc.titleLocalised corrosion behaviour of biomedical implant materials using electrochemical potentiokinetic reactivation and critical pitting potential methods
dc.typeMakale
dc.relation.journalCORROSION ENGINEERING SCIENCE AND TECHNOLOGY
dc.contributor.departmentİstanbul Üniversitesi , Mühendislik Fakültesi , Metalurji Ve Malzeme Mühendisliği
dc.identifier.volume50
dc.identifier.issue1
dc.identifier.startpage72
dc.identifier.endpage79
dc.contributor.firstauthorID29900


Bu öğenin dosyaları:

DosyalarBoyutBiçimGöster

Bu öğe ile ilişkili dosya yok.

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster