Show simple item record

dc.contributor.authorBilgin, Mehmet
dc.contributor.authorKurtulbas, Ebru
dc.contributor.authorSahin, Selin
dc.contributor.authorBAYAZİT, ŞAHİKA SENA
dc.date.accessioned2021-03-03T21:22:37Z
dc.date.available2021-03-03T21:22:37Z
dc.identifier.citationKurtulbas E., Bilgin M., Sahin S., BAYAZİT Ş. S. , "Comparison of different polymeric resins for naproxen removal from wastewater", JOURNAL OF MOLECULAR LIQUIDS, cilt.241, ss.633-637, 2017
dc.identifier.issn0167-7322
dc.identifier.otherav_5ed13822-4d23-4d21-ab7e-e1fce0d06976
dc.identifier.othervv_1032021
dc.identifier.urihttp://hdl.handle.net/20.500.12627/66271
dc.identifier.urihttps://doi.org/10.1016/j.molliq.2017.06.070
dc.description.abstractThe polymeric resins are eco-friendly, cheap and have good surface properties. These resins were used for Naproxen (NPX) adsorption from aqueous solutions. Three different resins were chosen. These are Amberlite XAD-2, XAD-4 and XAD-16. The effects of adsorption variables were tested. The variables were selected as adsorbent quantity, NPX concentration, pH of solution, temperature and contact time. Langmuir and Freundlich isotherm models were applied to the experimental data. And it was observed that Langmuir isotherm model fitted the experimental data properly. The pseudo second order kinetic model and Weber-Morris intraparticle diffusion model were used for kinetic analysis of NPX adsorption. The pseudo second order model was the best fitted kinetic model for NPX adsorption. The rate-controlling step was determined as the intraparticle diffusion step. The NPX adsorption on Amberlite resins was exothermic process. According to isotherm parameters, separation factor (R-L) values, kinetic and thermodynamic data, XAD-4 was found to be the most suitable adsorbent for NPX adsorption. Amberlite XAD-4 reached the maximum removal percentage (99.88%) at 0.5 g of adsorbent. NPX adsorption capacity of XAD-4 was 6.52 mg/g at 308 K, according to Langmuir isotherm model. (C) 2017 Elsevier B.V. All rights reserved.
dc.language.isoeng
dc.subjectFizikokimya
dc.subjectTemel Bilimler
dc.subjectFİZİKSEL, ATOMİK, MOLEKÜLER VE KİMYASAL
dc.subjectFizik
dc.subjectAtom ve Molekül Fiziği
dc.subjectTemel Bilimler (SCI)
dc.subjectKimya
dc.subjectKİMYA, FİZİKSEL
dc.titleComparison of different polymeric resins for naproxen removal from wastewater
dc.typeMakale
dc.relation.journalJOURNAL OF MOLECULAR LIQUIDS
dc.contributor.departmentBeykent Üniversitesi , ,
dc.identifier.volume241
dc.identifier.startpage633
dc.identifier.endpage637
dc.contributor.firstauthorID245344


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record