Basit öğe kaydını göster

dc.contributor.authorKorkut, Suleyman
dc.contributor.authorUnsal, Oner
dc.contributor.authorGunduz, Gokhan
dc.contributor.authorAs, Nusret
dc.contributor.authorAytin, Ayhan
dc.date.accessioned2021-03-04T11:03:34Z
dc.date.available2021-03-04T11:03:34Z
dc.date.issued2015
dc.identifier.citationAytin A., Korkut S., As N., Unsal O., Gunduz G., "Effect of Heat Treatment of Wild Cherry Wood on Abrasion Resistance and Withdrawal Capacity of Screws", DRVNA INDUSTRIJA, cilt.66, sa.4, ss.297-303, 2015
dc.identifier.issn0012-6772
dc.identifier.otherav_705d4920-74e1-4e15-9a20-1ea2482019d1
dc.identifier.othervv_1032021
dc.identifier.urihttp://hdl.handle.net/20.500.12627/77455
dc.identifier.urihttps://doi.org/10.5552/drind.2015.1440
dc.description.abstractIn its wise use, many properties of wood are important. Among these properties, wood abrasion resistance (AR) and withdrawal capacity of screws (WCS) are deemed to be relatively significant. It is well know that heat treatment changes the resistance features of wooden materials by changing the structural characteristics of wood. Within the scope of this study, the effects were investigated of the temperature and duration of heat treatment of Wild Cherry (Cerasus avium (L.) Monench) on its AR and its WCS in the radial direction and tangential direction. The test results indicated that weight loss (WL) and thickness reduction (TR) remained almost the same in the radial direction specimen, but there was significant TR in the tangential direction specimen. As a result of these changes, the abrasion effect of the S-42 abrader diminished based on the increase in the number of cycles. However, in both the radial and tangential direction, the WCS decreased to a significantly greater extent in the heat-treated specimens than in the control specimens.
dc.language.isoeng
dc.subjectMühendislik, Bilişim ve Teknoloji (ENG)
dc.subjectMALZEME BİLİMİ, KAĞIT & AHŞAP
dc.subjectMalzeme Bilimi
dc.subjectMühendislik ve Teknoloji
dc.titleEffect of Heat Treatment of Wild Cherry Wood on Abrasion Resistance and Withdrawal Capacity of Screws
dc.typeMakale
dc.relation.journalDRVNA INDUSTRIJA
dc.contributor.departmentDüzce Üniversitesi , ,
dc.identifier.volume66
dc.identifier.issue4
dc.identifier.startpage297
dc.identifier.endpage303
dc.contributor.firstauthorID55674


Bu öğenin dosyaları:

DosyalarBoyutBiçimGöster

Bu öğe ile ilişkili dosya yok.

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster