Show simple item record

dc.contributor.authorOngen, ATAKAN
dc.contributor.authorArayici, Semiha
dc.contributor.authorOzcan, H. Kurtulus
dc.date.accessioned2021-03-04T12:23:15Z
dc.date.available2021-03-04T12:23:15Z
dc.identifier.citationOngen A., Ozcan H. K. , Arayici S., "An evaluation of tannery industry wastewater treatment sludge gasification by artificial neural network modeling", JOURNAL OF HAZARDOUS MATERIALS, cilt.263, ss.361-366, 2013
dc.identifier.issn0304-3894
dc.identifier.otherav_77125511-ddf6-4195-bb0c-c889217fc2fe
dc.identifier.othervv_1032021
dc.identifier.urihttp://hdl.handle.net/20.500.12627/81738
dc.identifier.urihttps://doi.org/10.1016/j.jhazmat.2013.03.043
dc.description.abstractThis paper reports on the calorific value of synthetic gas (syngas) produced by gasification of dewatered sludge derived from treatment of tannery wastewater. Proximate and ultimate analyses of samples were performed. Thermochemical conversion alters the chemical structure of the waste. Dried air was used as a gasification agent at varying flow rates, which allowed the feedstock to be quickly converted into gas by means of different heterogeneous reactions. A lab-scale updraft fixed-bed steel reactor was used for thermochemical conversion of sludge samples. Artificial neural network (ANN) modeling techniques were used to observe variations in the syngas related to operational conditions. Modeled outputs showed that temporal changes of model predictions were in close accordance with real values. Correlation coefficients (r) showed that the ANN used in this study gave results with high sensitivity. (C) 2013 Elsevier B.V. All rights reserved.
dc.language.isoeng
dc.subjectMühendislik, Bilişim ve Teknoloji (ENG)
dc.subjectÇevre / Ekoloji
dc.subjectMÜHENDİSLİK, ÇEVRE
dc.subjectMühendislik
dc.subjectÇEVRE BİLİMLERİ
dc.subjectMühendislik ve Teknoloji
dc.subjectÇevre Mühendisliği
dc.subjectTarımsal Bilimler
dc.subjectTarım ve Çevre Bilimleri (AGE)
dc.titleAn evaluation of tannery industry wastewater treatment sludge gasification by artificial neural network modeling
dc.typeMakale
dc.relation.journalJOURNAL OF HAZARDOUS MATERIALS
dc.contributor.departmentİstanbul Üniversitesi , ,
dc.identifier.volume263
dc.identifier.startpage361
dc.identifier.endpage366
dc.contributor.firstauthorID77309


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record