Basit öğe kaydını göster

dc.contributor.authorYuksel, Umran
dc.contributor.authorKoseoglu, Pelin
dc.contributor.authorYasar, Nazl
dc.contributor.authorYilmaz-Ipek, Idil
dc.contributor.authorKabay, Nalan
dc.contributor.authorYuksel, Mithat
dc.contributor.authorYolseven, Goezde
dc.date.accessioned2021-03-04T18:29:37Z
dc.date.available2021-03-04T18:29:37Z
dc.identifier.citationYilmaz-Ipek I., Koseoglu P., Yuksel U., Yasar N., Yolseven G., Yuksel M., Kabay N., "Separation of Boron from Geothermal Water Using a Boron Selective Macroporous Weak Base Anion Exchange Resin", SEPARATION SCIENCE AND TECHNOLOGY, cilt.45, ss.809-813, 2010
dc.identifier.issn0149-6395
dc.identifier.otherav_8b070950-f7e5-4719-96d0-0077a255c64b
dc.identifier.othervv_1032021
dc.identifier.urihttp://hdl.handle.net/20.500.12627/94164
dc.identifier.urihttps://doi.org/10.1080/01496391003607357
dc.description.abstractIn this study, batch and column mode tests were performed to evaluate the efficiency of boron removal from geothermal water containing 10-11mgB/L using Lewatit MK 51 which is a macroporous weak base anion exchange resin with polyhydroxyl groups showing a very high selectivity and capacity for boron. The optimum resin amount for boron removal from geothermal water was determined as 4.0g resin/L-geothermal water. It was found that the sorption kinetics was influenced by particle size of the resin and temperature. The stirring rate had almost no effect on kinetic performance of the resin. According to the results of column-mode study performed, breakthrough and total capacities of the resin were obtained as 2.75 and 4.98mg/mL-resin, respectively.
dc.language.isoeng
dc.subjectMÜHENDİSLİK, KİMYASAL
dc.subjectMühendislik
dc.subjectMühendislik, Bilişim ve Teknoloji (ENG)
dc.subjectKimya Mühendisliği ve Teknolojisi
dc.subjectBiyokimya
dc.subjectAlkoloidler
dc.subjectTemel Bilimler
dc.subjectMühendislik ve Teknoloji
dc.subjectKimya
dc.subjectKİMYA, MULTİDİSİPLİNER
dc.subjectTemel Bilimler (SCI)
dc.titleSeparation of Boron from Geothermal Water Using a Boron Selective Macroporous Weak Base Anion Exchange Resin
dc.typeMakale
dc.relation.journalSEPARATION SCIENCE AND TECHNOLOGY
dc.contributor.departmentEge Üniversitesi , ,
dc.identifier.volume45
dc.identifier.startpage809
dc.identifier.endpage813
dc.contributor.firstauthorID717402


Bu öğenin dosyaları:

DosyalarBoyutBiçimGöster

Bu öğe ile ilişkili dosya yok.

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster